Vaping maintenance is an essential part of vaping, as it can extend the life of your vape device and vape hardware and result in a much better vaping experience overall.
Vape Maintenance Tips Every Vaper Needs to Know
Anyone who vapes needs to know how to maintain their device effectively. Having the best vaping hardware won’t stop it from falling apart if you don’t practise effective vaping maintenance. And let’s face it, no one wants to be the person with all the gear and no idea. Vaping maintenance is an essential part of vaping, as it can extend the life of your vape device and vape hardware and result in a much better vaping experience overall.
So, how can you best maintain your vape? The article will address each key component of your vape, from the device itself to the tank, coil, batteries, vape accessories and more, to ensure that you know how to look after every inch of your vape. Read on to learn the most important e-cigarette care tips.
Use the right charger
It is always best to use the charging cable that came with the vape itself. You don’t want to be the person who uses a cheap or dodgy phone charger on your vape and can never get it to full charge; it can even cause damage to your vape. Often, this is because the charging cable itself is low quality and cannot regulate the voltage supplied. For quick and safe charging, the charging cable that arrives with your vape is the best bet.
Clean out different connection points of your device
Cleaning all the many different connection points on your e-cigarette is very important. Depending on the type of e-cigarette you have, there may be slightly different points to clean. For example, if you’re using a mod then you also have to clean the battery terminal whereas in some mouth-to-lung vapes, the battery is built-in so you don’t have to worry about this.
Use a cotton bud for vape pens and harder-to-reach spots
When it comes to devices like vape pens, you don’t have the luxury of cleaning all the separate parts. Many starter kits and AIO vape pens come as one fixed unit, so mixing them with water and other liquids is a no-go. Instead, dip a cotton bud in PG (Propylene Glycol) or warm water and clean the device inside and out.
This is also very effective for harder-to-reach spots such as the mouthpiece. Dust can accumulate in the mouthpieces over time, and this build-up of dust can restrict the amount of vapour. If your mouthpiece is detachable, you can also soak your mouthpiece in alcohol or run it under warm water to give it a bit of a thorough clean.
Clean your vape tank regularly
E-liquid residue is inevitable over time, which is why it’s important to regularly clean your vape tank to keep it working at its best. There are a couple of different ways you can clean your vape tank, and this will depend on the condition that it’s currently in.
If your tank is relatively clean, a quick rinse under warm water might do the job. If there is a lot of residue left over by your e-liquid, soaking it in warm water can work wonders. Disassemble your tank and place the parts in a bowl of hot water, allowing it to soak for around an hour or so. After an hour has passed, remove the parts from the bowl and place them on a paper towel to dry.
Occasionally, a deeper clean may be required. This is where a PG rinse and a cleaning agent rinse can come in. A rinse with Propylene Glycol can be more effective at removing leftover flavour from previous e-liquids as PG carries flavour excellently.
Lastly, and this is if your vape tank is in a more dire situation, you can rinse your vape with a cleaning agent.
Don’t screw on your vape tank too tightly
You want your tank or clearomiser to be screwed on securely to your mod or e-cigarette, however screwing it on too tightly can cause unnecessary damage to the connections. Make sure that it is finger-tight, making it easy enough to unscrew with your hands when needed.
This also goes for re-assembling the parts of your tank after cleaning them. Make sure you only gently screw each component back on too gently as you can end up causing damage to the tank which can result in leakage.
Occasionally, you might find it hard to unscrew in which case, use a rubber grip to loosen and unscrew it. Make sure to never use tools to screw your tank onto your vape, even in this instance.
Prime your coils
This is often something that many vapers disregard as unimportant, but it can have major benefits to the overall flavour and vaping experience, and keep your coil life long. Whether you’re using pods, tanks or rebuildable, this is a key tip for vape maintenance. To prime your coil, simply put 5-10 drops of your e-liquid onto the coil to allow it to soak in for around 10 minutes. Then, reassemble your vape and you’re ready to start vaping.
Clean your coils when necessary
Coils don’t last forever, and eventually, they will need replacing. However, cleaning your coil heads can help to extend their life a little and help them to carry flavour better. Over time, coils can become extremely clogged with vape liquid which ends up looking like gunk. Learning how to avoid dry hits is important, and although there are many things that can cause a dry hit, clogged coils is one of them. It also means you will continue to waste your e-juice, not get as much flavour and cause damage to your tank.
If you’re using replaceable coils in a sub-ohm tank, you can rinse them under warm water to help remove some of the residual e-liquid. This will not revive them back to their original state, but it can extend their life for a couple of days until you get your new coils.
When it comes to cleaning rebuildable coils, it’s more of a necessity than a choice. Rebuildables, by nature of what they are, do take a bit more maintenance than normal.
It’s also important to know when you change your coil in order to keep your e-liquid tasting great and to avoid causing damage to your device.
Store your vape and accessories properly
Vapes can often get damaged when they are faced with the general wear and tear of everyday life. Keeping your e-cigarette in a case can help to prevent damage to your device, especially when travelling. Also, storing your batteries in plastic containers when not in use can save them from any damage and exposure to sunlight, water and heat.
Never use a damaged battery wrap
When it comes to safe vaping, a few tips on this list are more important than using a battery wrap. Battery wraps help to prevent the metal casing of the battery from coming into contact with external materials. However, sometimes battery wraps can become damaged with rips and tears in them. Continuing to use a damaged battery wrap can be extremely unsafe.
Using a damaged battery wrap can cause the outer casing of the battery to come into contact with the external metal of the vape device, and this can result in a short circuit. In turn, this can result in fires and cause your vape to explode.
But wait, don’t panic! It’s super simple to prevent this, just make you regularly keep an eye on your batteries, it takes a two seconds inspection of your battery to make sure the wrap is fine and you’re good to go. However, in the case that you do notice a tear, just recycle your vape batteries at your local supermarket or vape shop and use a new one.
Store your e-liquid properly
Keeping your e-juice out of direct sunlight is imperative to maintaining great flavour and its nicotine strength. If you’re using an e-liquid that contains nicotine, exposing it to direct sunlight can result in oxidation.
Keep your e-liquid sealed until you definitely want to use it. When sealed and stored correctly, e-liquid has a shelf-life of around 18 months. Once opened, their shelf life is reduced to 6 months. Albeit, this is still plenty of time, however, if you’re stocking up on e-liquid it is best to leave them be rather than dipping in and trying each one and breaking the seal.
Keep your e-liquid around a certain level
If you take a look at your vape tank, there will be a small hole. Whilst this hole serves a very real purpose, it can also serve as a marker which your vape juice should not drop below. Allowing your e-liquid to drop below this hole can result in burnt hits as your e-cigarette will be unable to draw in enough e-liquid to vaporize.
As an extra tip, it’s also important not to overfill your clearomiser or tank. This can lead to your tank being flooded which can cause permanent damage and an unpleasant vaping experience.
Final Thoughts
In order to keep your vaping experience safe and enjoyable, it’s important to perform some basic maintenance on your device. By following the tips provided in this blog post, you can ensure that your vape is always in good condition and working properly.
For high-quality vaping hardware and e-liquids for amazing prices, visit Legion of Vapers. As your trustworthy online vape shop, Legion of Vapers has everything you need for a great vaping experience.